When you are using a Sigma-Delta ADC IC when ever occurred following condition:
1. In the debug process had suspected a problem with the output signal of the sensor, and can not readily clear signals point out the problem?
2. Adjust the magnification of ADC,  reference voltage level and the sampling rate, the output range of the ADC value will also change, accidentally let the ADC value over the saturation limit.

TR8124 is tenx introduced a 24-bit Sigma-delta ADC IC, also launched its own ADC Development Assessment Tool (ENOB tester).
The kit provides an ADC output value will instantly convert into a wave function, when you connected the sensor to development tools, by this feature you
Not only can see the ADC output signal waveform directly, but also can watch instantly changes  level ADC output by adjust the parameters of the ADC,  greatly simplifies the ADC applications early in the development of complexity.

The relevant videos show please refer the link as below:
YouTube : https://youtu.be/de9cW8bIGHY

720x480:
https://dl.dropboxusercontent.com/u/17072333/tenx/TR8124%E9%96%8B%E7%99%BC%E8%A9%95%E4%BC%B0%E5%B7%A5%E5%85%B7_720x480.mp4

Full HD:
https://dl.dropboxusercontent.com/u/17072333/tenx/TR8124%E9%96%8B%E7%99%BC%E8%A9%95%E4%BC%B0%E5%B7%A5%E5%85%B7_HD.mp4

More information please contact Mr. Bruce Liao at Seraphim, Tel:02.26984540 ext. 245 or email bruceliao@seraphim.com.tw

Vendor: